Wholesale Distributor for Spa & Hot Tub Parts, Paks & Accessories Since 1979!
H.W.P. Inc
 
Spa Parts Equipment Paks Whirlpool Bath Parts Bath Tubs Cover Lifters Accessories Soundcast Audio Chemicals Filter Cartridges Infrared Saunas Sauna Rooms Steam Baths Spa Gazebo Muskoka Portable Spa Prompt Set Spas South Pacific Spas Baja Spas Baja Ingrounds Clearwater Spas Commercial Swim Spas
Stock Covers Overstock/Clearance Ideal Waterfall Proline Ordering Schedule Ideal Order Form Waterfall Order Form Proline Value Order Form Proline Premium Order Form Proline Elite Order Form
Pool & Spa Watch Dog BBQ Dragon Laz-Y-Spa Miami
Dealer Information Dealer Application Online Ordering Catalogs
 

Spa VGB Suctions

BALBOA WATER GROUP 211 GPM

BALBOA WATER GROUP 211 GPM VGB SUCTION The 211 GPM suction fitting meets the Virginia Graeme Baker Pool and Spa Safety Act of 2007. The patented 211 GPM flow rated suction fitting has received UL approval. The large 211 GPM suction is about 5 inches in diameter. The 211 GPM suction product was designed by Balboa Water Group with an intermediary piece that connects to 3/4” ID tubing. The suction rise up under the lip of the spa. When the suction cover is obstructed air is pulled through the 3/4” ID tubing, cavitating the pump so it loses prime and water flow is minimized. The 211 GPM assembly consists of the suction cover, the wall fitting, the nut, and the adaptor. Optional use of a gasket and compensating ring.
 

PART#

DESCRIPTION

30231U-LG

30231U-LG

VGB 2008 211 GPM Suction Cover and Screw / UV

30420

30420

VGB 2008 Buttress Suction Fitting x 2” Spigot Adaptor (Not Glued)

30425

30425

VGB 2008 Buttress Suction Fitting x 2-1/2” Spigot Adaptor (Not Glued)

30234-V

30234-V

Suction L Gasket (for L Gasket use 3 5/8” hole size)

30236-V

30236-V

Suction Flat Gasket (for flat gasket use 3 1/2” hole size)

30238-V

30238-V

Suction Compensating Ring

30239-V

30239-V

Suction Nut

BALBOA WATER GROUP 124 GPM

BALBOA WATER GROUP 124 GPM The 124 GPM suction fitting meets the Virginia Graeme Baker Pool and Spa Safety Act of 2007. The 124 GPM suction is IAPMO listed with a flow rating of 124 GPM. The 3-3/4” diameter fits the smaller recesses by reducing the need to modify any molds in order to make the larger suction fit. The smaller hole has a size of 2 – 3/8 inches with a flat gasket. The smaller 124 GPM suction product connects to 3/8” ID tubing. The suction rise up under the lip of the spa. When the suction cover is obstructed air is pulled through the 3/8” ID tubing, cavitating the pump so it loses prime and water flow is minimized.
The 124 GPM consists of the suction cover, the wall fitting and the adaptor. Optional use of a gasket is available.
 

PART#

DESCRIPTION

30173Y-LG

30173Y-LG

VGB 2008 124 GPM Suction Cover and Screw / UV

30147-V

30147-V

Suction Wall Fitting, 2 3/8” Hole Size

30115-V

30115-V

Suction Gasket

30160-V

30160-V

2” SPG x 1/2” Slip Threaded Safety Suction Adapter

73818

73818

3/8” Barb x 1/2” Spigot

73890

73890

3/8” 90 Degree Barb x 1/2” Spigot

HWP INC

CUSTOM MOLDED PLASTICS

VGB-2008 Compliant Spa Suctions 170 & 172 GPM Suctions - Hole Size: 3 5/16”

CMP25200-000-250

CMP25200-000-250

CMP25200-000-450

CMP25200-000-450

NEW PART#

DESCRIPTION

CMP25201-000

2.5” Slip (w/Plastic Cover)

CMP25201-200

2” Slip (w/Plastic Cover)

CMP25201-03X

170 GPM Cover Only (Plastic)

CMP25200-000-250

2.5” Slip Wall Fitting with Nut & Screw

CMP25200-202

2” Slip with Stainless Steel Cover

CMP25200-032

172 GPM Cover Only (Stainless Steel)

CMP25200-000-450

2” Slip Wall Fitting with Nut & Screw (Stainless Steel)

ACCESSORIES

 

PART #

DESCRIPTION

CMP25200-060-000

CMP25200-060-000

Compensator Ring

CMP26210-307-935

CMP26210-307-935

Flat Gasket

CMP26210-886-040

CMP26210-886-040

L Gasket

CMP26200-252-001

CMP26200-252-001

Compression Seal

CMP25200-040-010

CMP25200-040-010

Suction Nut

HWP INC

WATERWAY PLASTICS

5” SUPER MAXI-FLO SUCTION

640-8017 V

640-8017 V

640-8037 V

640-8037 V

SPECIFICATIONS:
• Total Open Area: 9.02 sq. in.
• Floor Flow Rate: N/A
• Wall Flow Rate: 164 GPM @ 5.85 ft/sec
• Flow Rate @ 1.5 ft/sec: 42 GPM
FEATURES:
• Available in 2” Spigot x 1 1/2” S and 1
1/2” MPT
• Removable cover to meet code as well as
easy servicing
SPECIFICATIONS:
• Total Open Area: 9.02 sq. in.
• Floor Flow Rate: N/A
• Wall Flow Rate: 106 GPM @ 3.79 ft/sec
• Flow Rate @ 1.5 ft/sec: 42 GPM
640-8017 V
640-8037 V

PART #

DESCRIPTION

640-8017 V

Super Maxi-Flo for Skimmer Equalizer - 1 1/2” S x 2” Spigot

640-8037 V

Super Maxi-Flo for Skimmer Equalizer - 1 1/2” MPT

WATERWAY 6” ULTRA SUCTION

640-8200 V

SPECIFICATIONS:
• Total Open Area: 10.2 sq. in.
• Floor Flow Rate: N/A
• Wall Flow Rate: 191 GPM @ 6.02 ft/sec with 215-8200 & 215-8230
• Wall Flow Rate: 136 GPM @ 4.30 ft/sec with 215-8220 & 215-8210
• Wall Flow Rate: 77 GPM @ 2.43 ft/sec with 215-8240 & 215-8250
• Flow Rate @ 1.5 ft/sec: 47 GPM

640-8200 V
640-8200 V

PART #

DESCRIPTION

640-820x V

6” Ultra Suction (Model 640-82XX V) with 2” Equalizer Wall Fitting (215-8200)

640-823x V

6” Ultra Suction (Model 640-82XX V) with 2 1/2” Threaded Wall Fitting (215-8230)

640-822x V

6” Ultra Suction (Model 640-82XX V) with 2” Threaded Wall Fitting (215-8220)

640-821x V

6” Ultra Suction (Model 640-82XX V) with 2” Insider Wall Fitting (215-8210)

640-824x V

6” Ultra Suction (Model 640-82XX V) with 1 1/2” Threaded Wall Fitting (215-8240)

640-825x V

6” Ultra Suction (Model 640-82XX V) with 1 1/2” Insider Wall Fitting (215-8250)

215-8200

Wall Fitting for 6” Ultra Suction - 2” Equalizer

215-8230

Wall Fitting for 6” Ultra Suction - 2 1/2” Threaded

215-8220

Wall Fitting for 6” Ultra Suction - 2” Threaded

215-8210

Wall Fitting for 6” Ultra Suction - 2” Insider

215-8240

Wall Fitting for 6” Ultra Suction - 1 1/2” Threaded

215-8250

l Fitting for 6” Ultra Suction - 1 1/2” Insider

WATERWAY SPC-2 V - 3.5” HI-FLO SUCTIONS

640-3250 V 640-3250 V

FEATURES:
• New Hi-Flo rating of 20 GPM (without vacuum break)
• Available in 1 1/2" S sizes
• Can be used with vacuum break fittings (below) for an extra high rating of 92 GPM

SPECIFICATIONS:
• Total Open Area: 4.01 sq. in.
• Floor Flow Rate: N/A
• Wall Flow Rate: 92 GPM @ 7.36 ft/sec (with vacuum break)
• Flow Rate @ 1.5 ft/sec: 18.75 GPM

PART #

DESCRIPTION

640-325x V

Hi-Flo Suction Assembly - 1 1/2” Hex (without Vacuum Break)

640-328x V

Hi-Flo Suction Assembly - 1 1/2” 90° Ell (without Vacuum Break)

640-348x V

Hi-Flo Suction Assembly - 1 1/2” 90° Ell (with 642-4120 VAC Vacuum Break)

WATERWAY VACUUM BREAK FITTINGS FOR SPC-2 V SUCTIONS

FEATURES:
• Improves performance and safety
• Complies with VGB2008
• UL tested to meet requirements of ASME A112.19.8-2007
• Available in two different plumbing configurations
• Increases UL Approved flow rating to 92 GPM

411-4000 VAC

411-4000 VAC

642-4120 VAC

642-4120 VAC

PART #

DESCRIPTION

411-4000 VAC

90° Ell 1 1/2” S x 1 1/2” Spigot with Vacuum Break Port

642-4120 VAC

90° Ell 1 1/2” S with Vacuum Break Port (included with 640-348x V)

642-4140 VAC

2” S x 2” S Suction Tee with Vacuum Break

WATERWAY SPC-3 V & SPC-3M V - 5” SUPER HI-FLO SUCTION

640-3580S V

640-3580S V

FEATURES:
• New Super Hi-Flo rating of 180 GPM
• Self-Contained (Portable) Spa rating of 251 GPM
• Available in 2” and 2 1/2” S sizes
• 2 1/2” can be used with vacuum break fittings (below) for an extra high rating of 232 GPM (non-Stainless Steel ONLY!)

640-3577 V

640-3577 V

SPECIFICATIONS:
• Total Open Area: 9.02 sq. in.
• Floor Flow Rate: N/A
• Wall Flow Rate: 180 GPM @ 6.42 ft/sec
• Flow Rate @ 1.5 ft/sec: 42 GPM

640-3577 V

PART #

DESCRIPTION

640-357x V

Super Hi-Flo Suction Assembly - 2” S

640-3570S V

Super Hi-Flo Suction Assembly - 2” S - Stainless Steel

640-358x V

Super Hi-Flo Suction Assembly - 2 1/2” S

640-3580S V

Super Hi-Flo Suction Assembly - 2 1/2” S - Stainless Steel

WATERWAY 3.5” ULTRA HI-FLO SUCTION

642-349xV 642-349xV
SPECIFICATIONS:
• Total Open Area: 6.24 sq. in.
• Floor Flow Rate: N/A
• Wall Flow Rate: 120 GPM @ 6.19 ft/sec
• Flow Rate @ 1.5 ft/sec: 29 GPM

PART #

DESCRIPTION

642-349xV

3.5” Ultra Hi-Flo Suction - Tall Assembly

WATERWAY 5” ULTRA SUPER HI-FLO SUCTION

642-393xV 642-393xV
SPECIFICATIONS:
• Total Open Area: 11.87 sq. in.
• Floor Flow Rate: N/A
• Wall Flow Rate: 224 GPM @ 6.07 ft/sec
• Flow Rate @ 1.5 ft/sec: 55.2 GPM

PART #

DESCRIPTION

642-393xV

5” Ultra Super Hi-Flo Suction

WATERWAY 5” DESIGNER PRO SERIES SUCTIONS

640-5201 V

640-5201 V

640-5301 VFEATURES:
• Flow Rate of 152 GPM
• Flow Rate of 252 GPM (portable spas only)
• Available in 2” and 2 1/2” S sizes
• Two tone color for additional color coordination
• Available in Stainless Steel / color of your choice

640-5301 V

640-5301 V

PART #

DESCRIPTION

640-520x V

5” Designer Pro Series Suction - 2” S - Two Tone

640-525x V

5” Designer Pro Series Suction -2 1/2” S - Two Tone

640-530x V

5” Designer Pro Series Suction - 2” S - Two Tone Stainless Steel

640-535x V

5” Designer Pro Series Suction -2 1/2” S - Two Tone Stainless Steel

640-523xV

5” Designer Pro Series Suction - 2” S - Two Tone Stainless Steel

WATERWAY VGB SUCTIONS REPLACEMENT PARTS

640-801x V SKIMMER EQUALIZER SUCTION

640-801x V SKIMMER EQUALIZER SUCTION

REF #

PART #

DESCRIPTION

1

819-8010

#8 Screw x ¾"

2

642-8000

V Suction Cover

3

215-5050

Wall Fitting - 2" Spigot x 1 ½" S

4

711-3260

Gasket

640-803x V SKIMMER EQUALIZER SUCTION

640-803x V SKIMMER EQUALIZER SUCTION

REF #

PART #

DESCRIPTION

1

642-3630

V Suction Cover

916-0038

V Suction Cover (Stainless Steel)

2

819-1250

#6 Stainless Steel Screw - 20x5/8

3

711-3260

Gasket

4

215-3620

2" Wall Fitting (for 640-357x V)

215-3610

2 ½" Wall Fitting (for 640-358x )

5

642-3620

Wall Fitting Nut

SUPER HI-FLO SUCTION

SUPER HI-FLO SUCTION

REF #

PART #

DESCRIPTION

1

642-3270

V Tall Suction Cover

2

819-0024

Stainless Steel Screw - #10 x 1"

3

215-3270

1 ½" Wall Fitting for Tall Suction

4

711-3250

Gasket

5

718-3150

Wall Fitting Nut

ULTRA HI-FLO SUCTION

ULTRA HI-FLO SUCTION

REF #

PART #

DESCRIPTION

1

819-8010

#8 Screw x ¾"

2

642-8000

V Suction Cover

3

819-9011

#6 Screw x ½"

4

215-5070

Wall Fitting - 1 ½" MPT

5

711-3260

Gasket

WATERWAY VACUUM BREAK FITTINGS

Increase flow rating to 232 GPM.
In case of obstruction of suction fitting openings, the differential pressure causes air to be pulled into the pump suction line. As a
result, the pump will lose prime and breaks vacuum behind the suction cover. The Waterway Super Hi Flo Spa Suction with Vacuum
Break is easy to install and service.

 

PART #

DESCRIPTION

413-2330V

413-2330V

2” Vacuum Break Suction Tee

642-3610V

642-3610V

2 1/2” Slip Vacuum Break 90 Degree Ell

642-3700V

642-3700V

2” Slip Vacuum Beak 90 Degree Ell

642-3680V

642-3680V

2” Straight Vacuum Break

640-3750V

640-3750V

3/4” Smooth Barb Suction Vent

642-3680

642-3680

2 1/2” x 2” S Straight Adapter - Non Vacuum Break Fitting for 2 1/2” Suctions

642-3700

642-3700

2 1/2” x 2” S 90 Degree Ell Adapter - Non Vacuum Break Fitting for 2 1/2” Suctions